AUTOMATIC ROLLER SHUTTER:
MANUAL BLINDS:
The automatic operation of the roller shutters is much more convenient than manual operation. There is no need to make any effort to turn the belt or lower the sash by hand. With a remote control or key switch, lockable switch or access control system, you can control not just one roller shutter, but entire groups of roller shutters (e.g. roller shutters for a single room, an entire floor, an entire house). Automatic roller shutter systems are equipped with a small motor with radio receiver or PLC, which opens and closes the shutters at the push of a button. You can automatically close all blinds, e.g. when leaving the house, by pressing a single button. Installing an automatic roller shutter control system will not only provide security for your home, but also ease of use.
The advantages of the automatic method:
Maximum ease of use. Minimal effort is required to operate the roller shutters.
Works perfectly on large roller shutters. The control system makes it easy to open and close even heavy shutters weighing up to 100 kg.
It can be operated without human intervention. If integrated with a computerised home control system, the shutters can be opened and closed at a set time.
There are several ways of operating shutters that allow them to be opened and closed manually. Manual or mechanical operation of shutters is a simpler and more affordable method than automatic operation. Most often, this type of control is installed on shutters that protect the windows of flats, shops, MFB.
Advantages of manual operation:
Affordable price. Especially if the ribbon control is chosen.
Easy maintenance. The mechanical elements of a manual operation do not require constant maintenance.
No power supply is required. Mechanical blinds do not need to be connected to the mains, so they can be used in any room. They use different types of drives, which provides comfort and convenience during operation.
Easy to install. The manual drive can be installed even by yourself, no professional knowledge is required.